四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

Environmentally Stable Polymer Gels with Super Deformability and High Recoverability Enhanced by Sub‐5 nm Particles in the Nonvolatile Solvent

It remains challenging to satisfy the combined performances for hydrogels with excellent mechanical behavior, high deformability, and super recoverability under harsh environmental conditions. In this study, we first established a strong polymer network via the crosslinking of polymer chains on the surfaces of sub‐5‐nm calcium hydroxide nanospherulites in ethylene glycol solvent. The organic gel expressed excellent mechanical properties such as a recoverable compressive engineering stress of 249 MPa and an elongation stress of 402 KPa, which was attributed to the uniform nanosized crosslinking structure as characterized by SEM. Moreover, the nonvolatile solvent remained in the gel, meaning that the sample can resist a wide temperature range of ?56 to 100 °C without losing the elastic properties. This novel organic gel could provide promising routes to develop the ideal elastic carriers for wearable devices, smart skin sensors, and damping materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 713–721     

Self-supported hollow Co(OH)2/NiCo sulfide hybrid nanotube arrays as efficient electrocatalysts for overall water splitting

Journal of Solid State Electrochemistry - Developing low-cost and earth-abundant electrocatalysts with high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER)...     

The double deflating technique for irreducible singular M-matrix algebraic Riccati equations in the critical case

As is known, Alternating-Directional Doubling Algorithm (ADDA) is quadratically convergent for computing the minimal nonnegative solution of an irreducible singular M-matrix algebraic Riccati equation (MARE) in the noncritical case or a nonsingular MARE, but ADDA is only linearly convergent in the critical case. The drawback can be overcome by deflating techniques for an irreducible singular MARE so that the speed of quadratic convergence is still preserved in the critical case and accelerated in the noncritical case. In this paper, we proposed an improved deflating technique to accelerate further the convergence speed – the double deflating technique for an irreducible singular MARE in the critical case. We proved that ADDA is quadratically convergent instead of linearly when it is applied to the deflated algebraic Riccati equation (ARE) obtained by a double deflating technique. We also showed that the double deflating technique is better than the deflating technique from the perspective of dimension of the deflated ARE. Numerical experiments are provided to illustrate that our double deflating technique is effective.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Alkaloids from Juglans Mandshurica maxim induce distinctive cell death in hepatocellular carcinoma cells

The aim of this work was to further investigate the anticancer potential of Juglans mandshurica Maxim, including the separation of active constituents and their anti-proliferative effects with underlying mechanism of action. Five alkaloids (1–5) were isolated from the bark of J. mandshurica. Among them, 1 showed the highest cytotoxic activities against Hep3B and HepG2 cells with an IC50 values of 61.80 and 56.24 μM, respectively. Therefore, the cellular mechanism involved 1 was subsequently studied. Our results showed that 1 markedly caused apoptosis and autophagy, but without cell cycle arrest in HepG2 cells. Interestingly, only autophagic cell death was induced in 1-treated Hep3B cells. It is concluded that the isolated alkaloids exerted a certain anti-hepatoma potential, and our results may provide a basis for the further investigation of the alkaloids extracted from J. mandshurica.     

Probabilistic error bounds on constraint violation for empirical-analytical Lagrangian models of motion

Nonlinear Dynamics - In contrast to many systems studied in the field of classical mechanics, models of animal motion are often distinguished in that they are both highly uncertain and evolve in a...     

Synthesis of Tri‐ and Difluoromethoxylated Compounds by Visible‐Light Photoredox Catalysis

Trifluoromethoxy (OCF₃) and difluoromethoxy (OCF₂H) groups are fluorinated structural motifs that exhibit unique physicochemical characteristics. Incorporation of these substituents into organic molecules is a highly desirable approach used in medicinal chemistry and drug discovery processes to alter the properties of a parent compound. Recently, tri‐ and difluoromethyl ethers have received increasing attention and several innovative strategies to access these valuable functional groups have been developed. The focus of this Minireview is the use of visible‐light photoredox catalysis in the synthesis of tri‐ and difluoromethyl ethers. Recent photocatalytic strategies for the formation of O?CF₃, C?OCF_3, O?CF₂H, and C?OCF₂H bonds as well as other transformations leading to the construction of OR_F groups are discussed herein.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.